Thermostat Installation; Water Pump Mechanical Seal Inspection - Honda VTR1000F Service Manual

Hide thumbs Also See for VTR1000F:
Table of Contents

Advertisement

INSTALLATION
Install the thermostat into the housing with its hole
facing rearwards.
Install a new O-ring into the groove in the housing
cover and install the cover onto the housing.
Install the cover bolts with the ground terminal and
tighten them.
Connect the upper radiator hose to the thermostat
housing cover.
Fill and bleed the cooling system (page
6-5).
Install the fuel tank (page 2-4).
WATER PUMP
MECHANICAL SEAL INSPECTION
Check the inspection hole for signs of coolant leak-
age.
If there is leakage, the mechanical seal is defective,
and it should be replaced (page 6-13).
COOLING SYSTEM
6-11

Advertisement

Table of Contents
loading

Table of Contents