Clutch Master Cylinder Inspection - Honda VTR1000F Service Manual

CLUTCH/GEARSHIFT LINKAGE
9-6
Remove the screw, fluid reservoir and O-rings from
the master cylinder.
Remove the screw and clutch switch.
Remove the pivot nut, bolt and clutch lever assem-
bly.
Remove the push rod and piston boot.
Remove the snap ring with the special tool.
TOOL:
Snap ring pliers 07914-3230001
Remove the washer, master piston, primary cup
and spring.
Clean the master cylinder, reservoir and master
piston in clean clutch fluid.
INSPECTION
Check the piston cups for wear, deterioration or
damage.
Check the spring for damage.
RESEHvorR
SCREW
I
C
UTClrilEVE-R A:SSE'MBLV
PIVO~
NUT
OLUTCH SINI ' CH
,PISTON
SPRI G
wASHER