Honda VTR1000F Service Manual page 117

ENGINE REMOVAL/INSlALLA liON
7-6
Remove the shock link bracket mounting nuts, bolts,
brackets with the side stand and four dowel pins.
Place a floor jack or other adjustable support under
the engine.
NOTE:
The jack height must be continually adjusted to
relieve stress for ease of bolt removal.
Loosen and remove the front engine hanger nut.
center engine hanger bolt and rear engine hanger
nut from the right side.
Hold each hanger bolt and loosen each lock nut us-
ing the special tool.
TOOLS:
Front and center:
Lock nut wrench
Rear:
Lock nut wrench
07VMA-MBB0100
07HMA-MR70200
Remove the lock nuts, adjusting bolts, engine han-
ger bolts and the engine from the frame.
SHOCK LINK BRACKET