Carburetor - Honda VTR1000F Service Manual

Remove the a-rings.
Install new a-rings into the carburetor grooves.
Install the removed parts in the reverse order of
removal.
NOTE:
- Note that the rear air funnel is longer than the
front air funnel.
-Install the air funnels by aligning the
".1/;,."
marks
on the air funnel and air cleaner housing.
CARBURETOR
REMOVAL/INSTALLA TION
Drain the coolant (page 6-5).
Remove the air cleaner housing (page 24-21).
NOTE:
When the carburetors will not be serviced, remove
the carburetor assembly with the air cleaner hous-
ing attached to prevent the threaded holes in the
carburetor from damaging.
Remove the pulse secondary air injection (PAIR)
control valve by disconnecting the No. 10 vacuum
tube and No. 16 air supply hoses.
Loosen the carburetor insulator band bolts from
the right side.
NOTE:
Insert the screwdriver through the hole in the heat
guard to loosen the front carburetor insulator band
bolt.
Remove the carburetor assembly from the insula-
tors.
VTR1000F (1) ADDENDUM
No. 16 HOSES
24-23