Honda VTR1000F Service Manual page 114

ENGINE REMOVAL
Drain the engine oil (page 3-11).
Remove the following:
-exhaust system (page 2-5).
-left and right radiators (page 6-6).
-carburetor assembly (page 5-5).
Remove the thermostat housing assembly by
disconnecting the following:
-ground wire connector
- engine coolant temperature sensor connector
-thermosensor connector
- bypass hose from the water pump
-water hoses from the cylinder heads
Remove the front fairing stays from the front cylin-
der head.
Remove the oil hose joints, mounting bolts and the
oil cooler assembly.
Remove the bolt and the battery ground cable from
the engine.
Disconnect the following:
-alternator 3P (white) connector
-oil pressure switch/neutral switch wire 2P (black)
connector
- speed sensor 3P (white) connector
-side stand switch 3P (green) connector
ENGINE REMOVAL/INSlALLA liON
BATIERY GROUND CABLE
BOLT
7-3