Carburetor Installation - Honda VTR1000F Service Manual

Hide thumbs Also See for VTR1000F:

Table of Contents

Connect the air vent tubes to the air vent joints and

install the tube bands as shown.

CARBURETOR INSTALLATION

Install the SE valve into each carburetor and tighten

the SE valve nut.

Connect the water inlet hose to the rear carburetor

heater and the outlet hose to the front carburetor

Connect the throttle cables to the throttle drum and

install them onto the cable stay.

Adjust the throttle cable (page 3-4).

AIR VENTTUBES

Troubleshooting