Honda VTR1000F Service Manual page 272

HYDRAULIC BRAKE
MOUNTING BOLT
RIGHT DRIVER FOOTPEG BRACKET
SNAP RING
MASTER CYLINDER
JOINT PIN
SWITCH SPRING ---\fr~-;f-::---
15-14
BRAKE PEDAL - - - - - - -
SNAP RING - - - -
RESERVOIR HOSE JOINT
Coat the master piston and piston cups with clean
brake fluid.
Install the spring onto the primary cup.
Install the spring, primary cup and master piston
into the master cylinder.
CAUTION:
Do not allow the piston cup lips
to
turn inside out.
Apply silicone grease to the push rod contacting
area of the master piston.
Install the push rod into the master cylinder.
Install the snap ring into the groove in the master
cylinder, using the special tool.
TOOL:
Snap ring pliers 07914-3230001
CAUTION:
Be certain the snap ring is firmly seated in the
groove.
O-RING
~
SPI1ING
f1I
COTTER PIN
PElIMAflYCUP
MASTER
PISTON