Carburetor Assembly; Carburetor Cleaning - Honda VTR1000F Service Manual

FUELSVSTEM
Remove the pilot screw, spring, washer and O-ring.
Check each jet for wear or damage.
Check the pilot screw for wear or damage.
Clean the jets with cleaning solvent and blow open
with compressed air.
CARBURETOR CLEANING
Remove the following:
-air cut-off valve
-diaphragm/vacuum piston
- main jet, needle jet holder and slow jet
- pilot screw
CAUTION:
Cleaning the ai, and fuel passages with a piece of
wire will damage the carburetor body.
Blow open all air and fuel passages in the carbure-
tor body with compressed air.
CARBURETOR ASSEMBL V
AIR CUT-OFF VALVE
MAIN JET
------"'~
FLOAT CHAMBER
,~
/ JOINT PIPE
~.~...
"
1/ .., •
d; •
PIL01
$CREW
COMPRESSION SPRING
~
~-=----
SLOW JET
R-
NEEOLE JET HOLDER
5-10
VACUUM CHAMBER
COVER
HOLDER
@~
MAIN JET
K'
PILOT SCREW
FLOAT FLOAT PIN
DIAPHRAGMN ACU UM
PISTON