Honda VTR1000F Service Manual page 120

7. Tighten the front adjusting bolt with the front en-
g ine hanger bolt to the specified torque and
check that there is no clearance between the ad-
justing bolt and engine.
TORQUE: 3 N·m (0.3 kgf·m , 2.2 Ibf·ft)
8. Hold the front adjusting bolt with the front engine
hanger bolt and tighten the lock nut to the speci-
fied torque using the special tool.
TOOL:
Lock nut wrench
07VMA-MBB0100
TORQUE: Actual:
54 N·m (5.5 kgf.m , 40 Ibf·ft)
Indicated: 49 N·m (5.0 kgf.m , 36Ibf·ft)
9. Tighten the rear engine hanger nut to the speci-
fied torque.
TORQUE: 64 N·m (6.5 kgf.m , 47 Ibf·ft)
10. Tighten the front engine hanger nut to the speci-
fied torque.
TORQUE: 64 N·m (6.5 kgf·m , 47 Ibf·ft)
Install the fou r dowel pins, shock link brackets and
tighten the mounting nuts.
TORQUE: 44 N·m (4.5 kgf.m, 33Ibf·ft)
ENGINE REMOVAL/INSlALLA liON
ADJUSTING BOi.. T
NO
CLEARAN CE
FRAME
LOCK NUTWRENCH
~~
\
~
/
t
SHOCK LINK
BRACKET
7-9