Honda VTR1000F Service Manual page 14

Hide thumbs Also See for VTR1000F:
Table of Contents

Advertisement

GENERAL INFORMATION
TORQUE VALUES
-STANDARD
FASTENER TYPE
TORQUE
FASTENER TYPE
TORQUE
N·m (kgf·m, Ibf·ft)
N·m (kgf.m, Ibf·ft)
5 mm bolt and nut
5 (0.5, 3.6)
5 mm screw
4 (0.4,2.9)
6 mm bolt and nut
10 (1.0, 7)
6 mm screw
9 (0.9,6.5)
8 mm bolt and nut
22 (2.2,16)
6 mm flange bolt (8 mm head, small
10 mm bolt and nut
34 (3.5, 25)
flange)
10(1.0,7)
12 mm bolt and nut
54 (5.5, 40)
6 mm flange bolt (8 mm head, large
flange)
12(1.2,9)
6 mm flange bolt (10 mm head) and nut
12(1.2,9)
8 mm flange bolt and nut
Engine
23 (2.3,17)
Frame
26 (2.7 ,20)
10 mm flange bolt and nut
39 (4.0,29)
• Torque specifications listed below are for important fasteners.
• Others should be tightened to standard torque values listed above.
NOTES: 1. Apply sealant to the threads.
2. Apply locking agent to the threads.
3. Replace with a new one.
4. Stake.
5. Apply oil to the threads and seating surface.
6. Apply engine oil to the O-ring.
7. U-nut.
8. ALOC bolt/screw: replace with a new one.
9. Apply grease to the threads.
-
ENGINE
ITEM
Q'TY
THREAD
TORQUE
REMARKS
DIA. (mm)
N·m (kgf.m, Ibf·ft)
MAINTENANCE:
Spark plug
2
12
14(1.4,10)
Crankshaft hole cap
1
30
15 (1.5 , 11)
NOTE 9
Timing hole cap
1
14
10 (1.0,7)
NOTE 9
Engine oil filter cartridge
1
20
10(1.0,7)
NOTE 5, 6
Engine oil drain bolt
1
12
29 (3.0,22)
LUBRICATION SYSTEM:
Oil pressure switch
1
PT 1/8
12(1.2,9)
NOTE 1
Oil pressure switch terminal screw
1
4
2 (0.2,1.4)
Oil pump bolt
2
6
12 (1.2,9)
Oil filter boss
1
20
18(1.8,13)
NOTE 2
FUEL SYSTEM:
Carburetor insulator band bolt
4
5
1 (0.1,0.7)
Vacuum joint
1
5
2 (0.25,1.8)
Reed valve cover bolt
4
5
5 (0.52 , 3.8)
NOTE 2
ENGINE MOUNTING:
Drive sprocket bolt
1
10
54 (5.5,40)
CYLINDER HEADNALVE:
Cylinder head cover bolt
8
6
10 (1.0,7)
Breather plate bolt
4
6
12(1.2,9)
NOTE 2
Cam sprocket bolt
4
7
20 (2.0 ,14)
NOTE 2
Camshaft holder bolt
16
7
21 (2.1 , 15)
NOTE 5
Cylinder head bolt
12
10
53 (5.4,39)
NOTE 5
Cylinder head sealing bolt
2
12
32 (3.3,24)
NOTE 2
Intake manifold vacuum port socket bolt
1
5
3 (0.34 , 2.5)
1-11

Advertisement

Table of Contents
loading

Table of Contents