Main Pump Inspection; Cooler Pump Inspection - Honda VTR1000F Service Manual

LUBRICATION SYSTEM
4-8
INSPECTION
MAIN PUMP
Temporarily assemble the main pump (page 4-9).
Measure the rotor tip clearance.
SERVICE LIMIT: 0.20 mm (0.008 in)
Measure the pump body clearance.
SERVICE LIMIT: 0.35 mm (0.014 in)
Measure the pump side clearance.
SERVICE LIMIT: 0.12 mm (0.005 in)
COOLER PUMP
Temporarily assemble the cooler pump outer rotor,
inner rotor, pump shaft and drive pin.
Measure the rotor t ip clearance.
SERVICE LIMIT: 0.20 mm (0.008 in)