Frame/Body Panels/Exhaust System Installation - Honda VTR1000F Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
2-6
INSTALLATION
EXHAUST PIPE
Install a new joint gasket and the rear exhaust pipe.
Tighten the joint nuts.
TORQUE:
12 N·m (1.2 kgf.m, 9lbf·ttl
Install a new gasket into the exhaust pipe.
Install new joint gasket and the exhaust pipe onto
the front cylinder head and rear exhaust pipe.
Tighten the joint juts.
TORQUE:
12 N·m (1.2 kgf·m, 9lbf·ttl
Tighten the rear exhaust pipe band bolt.
TORQUE: 26 N·m (2.7 kgf·m, 20 Ibf·ttl
Install the engine under cover (page 2-4l.
MUFFLER
Install the muffler onto the exhaust pipe, driver and
passenger footpeg brackets, and temporarily
tighten all bolts.
Tighten the muffler band bolt.
TORQUE: 26 N·m (2.7 kgf.m, 20 Ibf·ttl
Tighten the muffler mounting bolts.
~
S
GASKET
~
GASKET
S
12 N·m (1.2 kgf.m,
9 Ibf·ttl
~-- REAR EXHAUST PIPE
MUFFLER
~ ~~
~.:> ~~
----
GASKET
/XHAUST PIPE \ ' "
26 N·m (2.7 kgf·m , \
20lbf·ttl 26 N·m (2.7 kgf·m , 20 Ibf·ttl