Honda VTR1000F Service Manual page 142

CYLINDER HEAD/VALVE
8-18
Install the cylinder head onto the cylinder.
Apply oil to the threads and seating surfaces of the
10 mm cylinder head bolts and install them.
Tighten the 10 mm bolts in a crisscross pattern in 2
or 3 steps.
TORQUE: 53 N·m (5.4 kgf.m , 39 Ibf·ft)
Install and tighten the two 6 mm bolts.
Install a new O-ring into the water hose joint
groove.
Install the water hose joint and tighten the two
bolts.
Install the carburetor insulator with the "CARB UP"
mark facing out and up so that the tab is positioned
as shown.
Tighten the carburetor insulator band screw.
TORQUE: 1 N·m (0.1 kgf.m , 0.7 Ibf·ft)
Turn the cam chain tensioner lifter shaft clockwise
fully to retract the tensioner lifter and secure it with
a stopper tool.
10.
£
R
Ll FTER