Honda VTR1000F Service Manual page 89

Install the four joint bolts and tighten the nuts.
Install the cable stay onto the front carburetor and
tighten the screws.
Install the following onto the throttle arm pin:
Front carburetor:
Install the plastic -
plastic cone washer
cone washer with
-throttle link
the concave side
-plastic plain washer
facing to the -
metallic washer
throttle link. -
new cotter pin
Rear carburetor:
-plastic plain washer
-throttle link
-plastic cone washer
-metallic washer
-new cotter pin
Move the throttle drum and check that throttle
valves move smoothly and return automatically
without binding.
Connect the water joint hose to the front and rear
carburetor heaters.
FUELSVSTEM
REAR-
o
--=-=--"""' "
WATER JOINT HOSE
5-15