Fork Installation - Honda VTR1000F Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Hold the rebound damping adjuster and screw in
the fork cap.
Install the fork cap into the fork tube.
NOTE:
Tighten the fork cap after installing the fork tube in-
to the fork bridges.
INSTALLATION
Route the cables,
Install the fork tube into the fork bridges and handle-
wire harnesses
bar.
and hoses
Make sure that the handlebar boss is positioned in
properly
the fork top bridge groove.
(page 1-18).
Align the stopper ring groove with the top surface
of the handlebar.
Tighten the fork top bridge pinch bolt.
TORQUE: 23 N·m (2.3 kgf·m, 17 Ibf·ft)
Tighten the fork bottom bridge pinch bolt.
TORQUE: 49 N·m (5.0 kgf·m ,36Ibf·ft)
13-20
FORK
CAP--...:-~.
DAMPING
MU.''''''"''