Coolant Temperature Gauge - Honda VTR1000F Service Manual

COOLANT TEMPERATURE GAUGE
NOTE:
The coolant temperature gauge displays "35°C" to
"132°C". It displays "- _oC" when the coolant
temperature is below 34°C and the displayed
figures blink when the coolant temperature is
above 122°C.
INSPECTION
Gauge does not operate properly
1. Check that the tachometer, speedometer and fuel
gauge function properly.
• If they do not function, check the power source
line and sensor ground line (page 24-27).
• If they function properly, go to step 2.
2. Turn the ignition switch OFF and disconnect the
thermosensor connector.
Turn the ignition switch ON and check the
coolant temperature gauge.
• If the gauge displays" - - °C", go to step 3.
·,f the gauge displays "132°C" and. the figures
blink, check for short circuit in the Green/Blue
wire between the thermosensor and combina-
tion meter.
·,f the gauge displays any figures other than
"- _oC", replace the meter/gauge assembly.
3. Turn the ignition switch OFF and ground the
connector terminal with a jumper wire.
Turn the ignition switch ON and check the
coolant temperature gauge.
·,f the gauge displays "132°C" and the figures
blink, check the thermosensor (page 19-11).
• If the gauge displays" - - °C", check for open
circuit in Green/Blue wire between the ther-
mosensor and combination meter.
·,f the gauge displays any figures other than
"132°C", replace the meter/gauge assembly.
-1=-
-
VTR1000F (1) ADDENDUM
,,-
I I
-
-
COOLANT TEMPERATURE GAUGE
THERMOSENSOR CONNECTOR
-1=-
-
-
-
, I
I
~
A
~
I
,
J
24-29