Remove the screws and brake hose clamps if
neces-
sary.
Remove the pivot collars and dust seals.
PIVOT BEARING REPLACEMENT
RIGHT PIVOT BEARING
Remove the snap ring.
Drive ball bearings and distance collar out of the
pivot.
Pack new bearing cavities with molybdenum disul-
fide grease.
Press the inner bearing into the pivot with the mark-
ing side facing up until it is fully seated, using the
special tools.
TOOLS:
Driver
077 49-00 10000
Attachment, 32
X
35 mm
07746-0010100
Pilot, 20 mm
077 46-0040500
Install the distance collar.
Press the outer bearing into the pivot with the mark-
ing side facing up until it is seated, using the spe-
cial tools.
TOOLS:
Driver
077 49-00 10000
Attachment, 37
X
40 mm 07746-0010200
Pilot, 20 mm
077 46-0040500
Install the snap ring
.
REAR WHEEL/SUSPENSION
14-17