Shift Fork/Shift Drum Installation - Honda VTR1000F Service Manual

Check the shift drum guide groove for abnormal
wear or damage.
Check the shift drum bearings for smooth rotation.
I NSTALLA TION
Apply locking agent to the set plate bolt threads.
Install the shift drum and bearing set plate with the
"OUT" mark facing out, and its cutout aligned with
the pin on the crankcase.
Install and tighten the set plate bolt.
The shift forks have the following identification
marks:
RL: right and left shift forks
C: center shift fork
Install the shift forks into the shift drum guide
groove with the identification marks facing toward
the right side of the engine and insert the fork shaft.
Install the set plate in the same manner as that of
the shift drum.
Assemble the crankcase halves (page 11-10).
CRANKCASE/TRANSMISSION
IDE r lFlCAnON MAR KS
11-5