Cam Sprocket Installation - Honda VTR1000F Service Manual

CYLINDER HEAD/VALVE
8-20
The camshaft holders have the following identifica-
tion marks:
IN: Intake camshaft holder
EX: Exhaust camshaft holder
Install the dowel pins.
Install the camshaft holders in their proper loca-
tions.
Apply oil to the threads and seating surfaces of the
camshaft holder bolts.
Install the bolts and tighten them in a crisscross pat-
tern in 2 or 3 steps.
TORQUE: 21 N·m (2.1 kgf·m, 15Ibf·ft)
CAM SPROCKET INSTALLATION
NOTE:
• If both front and rear camshafts were serviced,
install the front cam sprockets first, then install
the rear cam sprockets.
• Even if you are servicing either the front or rear
cylinder head, the other cylinder head cover
must be removed and the other cam sprocket
position must be checked.
Remove the crankshaft hole cap and timing hole
cap.
' -IN" MARK
/