Performing Maintenance Procedures; Upgrading The Software File Of A Video Device - RADVision SCOPIA TIP Deployment Manual

7

Performing Maintenance Procedures

This section details to the ongoing administrator tasks required to maintain your video
network:

Upgrading the Software File of a Video Device

You can quickly and easily perform remote software upgrades of video devices from SCOPIA
Management by uploading an upgrade file and applying it to the device.
Note
Perform the upgrade remotely using the SCOPIA Management. You cannot upgrade the
firmware of the gateway directly on the device.
Depending on your support contract, you can upgrade to:
Upgrades may require first applying the major upgrade and then the incremental upgrade
within that major version. For example, to upgrade from 8.0.0.38.2 to 8.1.0.0.1, first apply
the major upgrade to 8.1.0.0.0, and then the incremental upgrade to 8.1.0.0.1.
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
•
Upgrading the Software File of a Video Device ......................................... page 67
•
Restoring the Previous Software Version of a Network Device ....................... page 69
•
Downgrading your SCOPIA TIP Gateway ................................................. page 71
•
Changing the IP Address of your Gateway ............................................... page 71
•
The next major version.
Upgrading a major version requires a new license.
This kind of upgrade changes one of the first two digits in a version number. For example,
upgrading from version 8.0 to version 8.1 requires a new license.
•
An incremental version.
Upgrading an incremental version does not require a new license.
This kind of upgrade changes the third, fourth and fifth digits in the version number. For
example, upgrading from 8.0.0.34.0 to 8.0.0.36.1 or to 8.0.0.36.2 does not require a new
license.
Performing Maintenance Procedures | 67