Table of Contents
Advertisement
About Gateway Services
V
E
IEWING
XISTING
S
ERVICES
A
E
DDING OR
DITING
S
ERVICES
124
SCOPIA 400/1000 Gateway User Guide
The following topics discuss how you can configure services on the Services tab:
Viewing Existing Services
Adding or Editing Services
Deleting Gateway Services
The Services tab in the Gateway interface displays a list of currently defined
services for the Gateway in a table format with the following columns and fields:
Prefix—Displays the prefix that identifies the service.
Description—Description of the service.
Call Type—Media type of the call.
Bit Rate—Total bandwidth requested for the service.
PRI Port 1 or 2/Serial Port 1 to 4—Indicates whether or not the service
is enabled for the specified port.
Total—Displays the total number of services currently defined in the
Gateway.
On the Services tab, you can add a new service or edit an existing one.
Procedure
1
In the Gateway interface, on the sidebar, click Gateway (if not already
selected).
Click Services.
2
To add a new service, click Add. To edit an existing service, select it
3
and then click Edit.
In the Prefix field, enter or edit the prefix number of the service. The
4
prefix can be up to 31 characters long. Valid characters are 0 to 9 and
pound sign (#), asterisk (*), and comma (,).
Since the comma cannot be used in the Party number field of the MCU
Note
Conference Control interface, we recommend that you do not use the comma
as a prefix in Gateway fields.
In the Description field, enter or edit the description of the service (up to
5
31 characters in length).
on page 124
on page 124
on page 126
Advertisement
Table of Contents
