Copying/Printing Stops - Canon MG7700 Series Online Manual

Copying/Printing Stops

Is the disc tray guide opened while printing on paper?
Check1
Close the disc tray guide and tap OK on the touch screen.
Is paper loaded?
Check2
Make sure paper is loaded.
If necessary, load paper.
Do documents to be printed have many photographs or illustrations?
Check3
It takes time for the machine and the computer to process large data such as photos or other graphics, so it may
seem that the machine is not working.
Also, if you are printing data that requires a lot of ink on successive sheets of plain paper, the machine may
pause temporarily. In either case, wait until the process is complete.
Note
• If you are printing a document with a large printing area or printing several copies, printing may pause to
allow the ink to dry.
Has machine been printing continuously for a long period?
Check4
If the machine has been printing continuously for a long time, the print head or other parts around it may
overheat. The machine may stop printing at a line break for a period of time and then resume printing.
In this case, wait a while without doing anything. If the printing does not resume, interrupt your print session and
turn the machine off for at least 15 minutes.
Caution
• Print head and surrounding area can become extremely hot. Never touch print head or nearby
components.
771