Installing Your Multifunction to Additional Computers on Your Network MAXIFY MB2320 Windows OS...
Installing Your Multifunction to Additional Computers on Your Network MAXIFY MB2320 Windows OS Preparing to Connect My Multifunction to My Network Network Requirements Notes on Wireless Connection Setting up the Network Connection...
Preparing to Connect the Multifunction To the Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network.
Preparing to Connect the Multifunction To the Network Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer. •...
Setup CD-ROM during restarting. The installation resumes once your computer has restarted. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.
Setting Up the Network Connection If your MB2320 has already been set up on your wireless network, it is only necessary to install the software on the additional computer(s). The printer does not have to be reset and no additional settings need to be made. To begin the setup procedure, insert the Setup CD-ROM into your computer.* Setup will start automatically.
Setting Up the Network Connection Continue following on-screen instructions. On the Printers on Network List, select your printer (its serial number will be listed in the Serial Number column) and click Next.
Installing the Drivers & Software Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next. *MP Drivers is required and cannot be deselected. We recommend installing Quick Toolbox to take full advantage of the printer’s features.
Installing the Drivers & Software Continue following on-screen instructions. When the Setup Completion dialog box appears, click Complete. At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit the setup program.