Quality & Media
This dialog allows you to create a basic print setup in accordance with the paper type. Unless special
printing is required, normal printing can be performed just by setting the items in this dialog.
Select the type of media to be used.
You must select the type of media actually loaded in the printer. This selection enables the printer to
carry out printing properly for the material of the media used.
• When printing on a double postcard, select Postcard Double for Paper Size, and then print again.
• If you print on paper other than hagaki, load the paper according to usage instructions, and then click
Shows the source from which paper is supplied.
• The paper size determines whether the cassette 1 or cassette 2 is used. The cassette to be used is
displayed below Paper Source.
Select the one that is closest to the original document type and the purpose.
When one of the radio buttons is selected, the appropriate quality will be set automatically.
Gives priority to print quality over printing speed.
Prints with average speed and quality.
This setting is appropriate for test printing.
Select this radio button to specify a quality.