Spanning Tree Commands - Planet IGSW-2840 User Manual

Example
Console#show mac-address-table aging-time
Aging time: 100 sec.
Console#

5.20 Spanning Tree Commands

This section includes commands that configure the Spanning Tree Algorithm (STA) globally for the switch, and commands that
configure STA for the selected interface.
Command
spanning-tree
spanning-tree mode
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree path-cost method
spanning-tree
transmission-limit
spanning-tree mst-configuration
mst vlan
mst priority
name
revision
max-hops
spanning-tree
spanning-disabled
spanning-tree cost
spanning-tree port-priority
spanning-tree edge-port
spanning-tree portfast
spanning-tree link-type
spanning-tree mst cost
spanning-tree mst port-priority
Function
Enables the spanning tree protocol
Configures STP, RSTP or MSTP mode
Configures the spanning tree bridge forward time
Configures the spanning tree bridge hello time
Configures the spanning tree bridge maximum age
Configures the spanning tree bridge priority
Configures the path cost method for RSTP/MSTP
Configures the transmission limit for RSTP/MSTP
Changes to MSTP configuration mode
Adds VLANs to a spanning tree instance
Configures the priority of a spanning tree instance
Configures the name for the multiple spanning tree
Configures the revision number for the multiple spanning tree
Configures the maximum number of hops allowed in the region
before a BPDU is discarded
Disables spanning tree for an interface
Configures the spanning tree path cost of an interface
Configures the spanning tree priority of an interface
Enables fast forwarding for edge ports
Sets an interface to fast forwarding
Configures the link type for RSTP/MSTP
Configures the path cost of an instance in the MST
Configures the priority of an instance in the MST
533
User's Manual of IGSW-2840
Mode
GC
GC
GC
GC
GC
GC
GC
GC
GC
MST
MST
MST
MST
MST
IC
IC
IC
IC
IC
IC
IC
IC