Planet IGSW-2840 User Manual page 389

sendmail - Displays settings for the SMTP event handler (page 4-58).
trap - Displays settings for the trap function.
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message level for flash memory is "errors" (i.e., default
level 3 - 0), the message level for RAM is "informational" (i.e., default level 7 -0).
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#show logging ram
Syslog logging:
History logging in RAM: level debugging
Console#
Table 4-16 show logging flash/ram - display description
Field
Syslog logging
History logging
in FLASH
History logging
in RAM
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: disable
REMOTELOG facility type: local use 7
REMOTELOG level type: Debugging messages
REMOTELOG server IP address: 1.2.3.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
Enabled
Enabled
Description
Shows if system logging has been enabled via the
logging on command.
The message level(s) reported based on the logging
history command.
The message level(s) reported based on the logging
history command.
389
User's Manual of IGSW-2840