Planet IGSW-2840 User Manual page 541

Default Setting
32768
Command Mode
MST Configuration
Command Usage
MST priority is used in selecting the root bridge and alternate bridge of the specified instance. The device with the highest
priority (i.e., lowest numerical value) becomes the MSTI root device. However, if all devices have the same priority, the
device with the lowest MAC address will then become the root device.
You can set this switch to act as the MSTI root device by specifying a priority of 0, or as the MSTI alternate device by
specifying a priority of 16384.
Example
Console(config-mstp)#mst 1 priority 4096
Console(config-mstp)#
name
This command configures the name for the multiple spanning tree region in which this switch is located. Use the no form to clear
the name.
Syntax
name name name - Name of the spanning tree.
Default Setting
Switch's MAC address
Command Mode
MST Configuration
Command Usage
The MST region name and revision number (page 4-210) are used to designate a unique MST region. A bridge (i.e.,
spanning-tree compliant device such as this switch) can only belong to one MST region. And all bridges in the same
region must be configured with the same MST instances.
Example
Console(config-mstp)#name R&D
Console(config-mstp)#
Related Commands
revision
541
User's Manual of IGSW-2840