Planet IGSW-2840 User Manual page 398

you must indicate the number of hours and minutes your time zone is east (before) or west (after) of UTC.
Example
Console(config)#clock timezone Japan hours 8 minute 0 after-UTC
Console(config)#
Related Commands
show sntp
calendar set
This command sets the system clock. It may be used if there is no time server on your network, or if you have not configured the
switch to receive signals from a time server.
Syntax
calendar set hour min sec {day month year | month day year}
hour - Hour in 24-hour format. (Range: 0-23)
min - Minute. (Range: 0-59)
sec - Second. (Range: 0-59)
day - Day of month. (Range: 1-31)
month -january | february | march | april | may | june | july | august | september | october | november | december
year - Year (4-digit). (Range: 2001-2100)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to set the system clock to 15:12:34, April 1st, 2004.
Console#calendar set 15 12 34 1 April 2004
Console#
show calendar
This command displays the system clock.
Default Setting
None
4-62
Command Mode
Normal Exec, Privileged Exec
398
User's Manual of IGSW-2840