Planet IGSW-2840 User Manual page 175

If you have host devices that do not support GVRP, you should configure static or untagged VLANs
for the switch ports connected to these devices (as described in "Adding Static Members to VLANs
(VLAN Index)"). But you can still enable GVRP on these edge switches, as well as on the core
switches in the network.
■ VLAN and Link aggregation Groups
In order to use VLAN segmentation in conjunction with port link aggregation groups, you can first set the port link aggregation
group(s), and then you may configure VLAN settings. If you wish to change the port link aggregation grouping with VLAN
already in place, you will not need to reconfigure the VLAN settings after changing the port link aggregation group settings.
VLAN settings will automatically change in conjunction with the change of the port link aggregation group settings
4.8.1.1 VLAN Basic Information
The VLAN Basic Information page displays basic information on the VLAN type supported by the Industrial Managed Switch.
The page includes the following fields:
Object
• VLAN Version Number
• Maximum VLAN ID
• Maximum Number of
Supported VLANs
4.8.1.2 GVRP Status
GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange VLAN information in order to register
VLAN members on ports across the network.
Figure 4-8-1 VLAN Basic Information screenshot
Description
The VLAN version used by this Industrial Managed Switch as specified in the
IEEE 802.1Q standard.
Maximum VLAN ID recognized by this Industrial Managed Switch.
Maximum number of VLANs that can be configured on this Industrial Managed
Switch.
175
User's Manual of IGSW-2840