Planet IGS-10020PT Quick Installation Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Switch
  5. IGS-10020PT
  6. Quick installation manual

Planet IGS-10020PT Quick Installation Manual

L2+ industrial 8-port gigabit 802.3af/at poe +2-port 100/1000x sfp managed switch
Hide thumbs Also See for IGS-10020PT:
Table of Contents

Advertisement

Quick Links

See also: Command Manual
Industrial L2+ 8-Port Gigabit 802.3af/at PoE
+ 2-Port 100/1000X SFP Managed Switch
IGS-10020PT/IGS-10020HPT
Quick Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Planet IGS-10020PT

Summary of Contents for Planet IGS-10020PT

  • Page 1 Industrial L2+ 8-Port Gigabit 802.3af/at PoE + 2-Port 100/1000X SFP Managed Switch IGS-10020PT/IGS-10020HPT Quick Installation Guide...

  • Page 2: Table Of Contents

    Table of Contents 1. Package Contents ..................3 Requirements ..................... 4 3. Wiring the Power Inputs ................5 4. Terminal Setup ................... 7 4.1 Logging on to the Console..............8 4.2 Configuring IP Address ................. 9 5. Starting Web Management .................12 5.1 Logging in to the Industrial Managed PoE+ Switch ........12 5.2. Saving Configuration ................16 6. Recovering Back to Default Configuration .............18 7.

  • Page 3: Package Contents

    1. Package Contents Thank you for purchasing PLANET L2+ Industrial Managed Gigabit PoE Switch, such as IGS-10020PT and IGS-10020HPT. The descriptions of these models are as follows: IGS-10020PT/ Industrial 8-Port 10/100/1000T 802.3af/at PoE + 2-Port IGS-10020HPT: 100/1000X SFP Managed Switch “Industrial Managed PoE+ Switch” mentioned in this Quick Installation Guide refers to the above models.

  • Page 4: Requirements

    Requirements z Workstations running Windows XP/2003/Vista/7/8/10/2008, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Serial Port Connection (Terminal)  The above Workstations come with COM Port (DB9) or USB-to-RS232 converter.  The above Workstations have been installed with terminal emulator, such as Hyper Terminal included in Windows XP/2003.

  • Page 5: Wiring The Power Inputs

    1. Insert positive/negative DC power wires into Contacts 1 and 2 for Power 1, or Contacts 5 and 6 for Power 2. z IGS-10020PT: 48V~56V DC DI1 DO0 DO1 1A@24V Figure 3-1: IGS-10020PT Upper Panel z IGS-10020HPT: DC 12~48V DI1 DO0 DO1 1A@24V Figure 3-2: IGS-10020HPT Upper Panel...
  • Page 6 2. Tighten the wire-clamp screws for preventing the wires from loosening. Power 1 Power 2 Positive (+) Pin Negative (-) Pin IGS-10020PT/IGS-10020HPT Pin 1 / 5 Pin 2 / 6 The wire gauge for the terminal block should be in the range from 12 to 24 AWG. Note...

  • Page 7: Terminal Setup

    4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ45 type serial (console) port of the Industrial Managed PoE+ Switch. The console port of the Industrial Managed PoE+ Switch is DCE already, so that you can connect the console port directly through PC without the need of null modem.

  • Page 8: Logging On To The Console

    Once the terminal has been connected to the device, power on the Industrial Managed PoE+ Switch and the terminal will display “running testing procedures”. The following console screen is based on the IGS-10020HPT. The display of the IGS-10020PT is the same as that of the IGS- 10020HPT. Note When the following dialog box shown in Figure 4-3 appears, please enter the factory default user name “admin” and password “admin”.

  • Page 9: Configuring Ip Address

    4.2 Configuring IP Address The Industrial Managed PoE+ Switch is shipped with default IP address shown below: IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 To check the current IP address or modify a new IP address for the Industrial Managed PoE+ Switch, please use the procedure as follows:  Display of the current IP Address 1. At the “#” prompt, enter “show ip interface brief”.
  • Page 10  Configuration of the IP Address 3. At the “#” prompt, enter the following command and press <Enter> as shown in Figure 4-5. The previous command would apply the following settings for the Industrial Managed PoE+ Switch. IP Address: 192.168.1.100 Subnet Mask: 255.255.255.0 Figure 4-5: Configuring IP Address Screen 4. Repeat step 1 to check if the IP address has changed.
  • Page 11  Store the current switch configuration 5. At the “#” prompt, enter the following command and press <Enter>. # copy running-config startup-config Figure 4-6: Saving Current Configuration Command Screen If the IP is successfully configured, the Industrial Managed PoE+ Switch will apply the new IP address setting immediately. You can access the Web interface of the Industrial Managed PoE+ Switch through the new IP address. If you are not familiar with the console command or the related parameter, enter “help”...

  • Page 12: Starting Web Management

    5. Starting Web Management The following shows how to start up the Web Management of the Industrial Managed PoE+ Switch. Note the Industrial Managed PoE+ Switch is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address.
  • Page 13 The following web screen based on IGS-10020HPT will be the same as that of IGS-10020PT. Note 3. After entering the password, the main screen appears as shown in Figure 5-3. Figure 5-3: Web Main Screen of Industrial Managed PoE+ Switch The Switch Menu on the top of the Web page lets you access all the commands and statistics the Industrial Managed PoE+ Switch provides. The Switch Menu always contains one or more buttons, such as “System”, “Switching”, “QoS”,...
  • Page 14 Figure 5-6: Switch Menu – Switching Figure 5-7: Switch Menu -- QoS Figure 5-8: Switch Menu -- Maintenance...
  • Page 15 Figure 5-9: Switch Menu -- Security Figure 5-10: Switch Menu -- PoE Figure 5-11: Switch Menu – Ring...

  • Page 16: Saving Configuration

    Figure 5-12: Switch Menu – ONVIF If you are not familiar with Switch functions or the related param- eter, press “Help icon” anytime on the Web page to get the help description. Note Now, you can use the Web management interface to continue the Switch management or manage the Switch by console interface.
  • Page 17 3. Or the other way to save the setting is to Click Maintenance, Save Startup Config. Figure 5-14: Save Config -- Maintenance...

  • Page 18: Recovering Back To Default Configuration

    Web interface within the same subnet of 192.168.0.xx and default password. Be noted that all the previous setups will be disappeared after the factory default reset is made. Console P1 P2 FAULT Ring R.O. 115200,N,8,1 1000 LNK/ACT 1000 LNK/ACT 100/1000X SFP RESET PoE-in-Use Figure 6-1: IGS-10020PT/IGS-10020HPT Reset Button...

  • Page 19: Customer Support

    7. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource on PLANET web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQs: http://www.planet.com.tw/en/support/faq Switch support team mail address: support@planet.com.tw IGS-10020PT/IGS-10020HPT User’s Manual: https://www.planet.com.tw/en/support/downloads?method=category&c1=industrial- ethernet&p=&type=3 (Please select your switch model name from the Product Model drop-down menu) Copyright © PLANET Technology Corp. 2018. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp.

This manual is also suitable for:

Igs-10020hpt

Table of Contents