Planet IGSW-2840 User Manual page 539

spanning-tree transmission-limit
This command configures the minimum interval between the transmission of consecutive RSTP/MSTP BPDUs. Use the no form
to restore the default.
Syntax
spanning-tree transmission-limit count no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree transmission-limit 4
Console(config)#
spanning-tree mst-configuration
This command changes to Multiple Spanning Tree (MST) configuration mode.
Default Setting
No VLANs are mapped to any MST instance.
The region name is set the switch's MAC address.
Command Mode
Global Configuration
Example
Console(config)#spanning-tree mst configuration
Console(config-mstp)#
Related Commands
mst vlan
mst priority
name
revision
max-hops
539
User's Manual of IGSW-2840