Table of Contents
Advertisement
Click Port LACP Aggregation Port.
1.
2.
Set the System Priority, Admin Key, and Port Priority for the Port Actor.
3.
You can optionally configure these settings for the Port Partner. (Be aware that these settings only affect the
administrative state of the partner, and will not take effect until the next time an aggregate link is formed with this device.)
4.
After you have completed setting the port LACP parameters, click Apply.
Figure 4-5-14 Aggregation Port screenshot
Figure 4-5-15 Aggregation Port screenshot
137
User's Manual of IGSW-2840
Advertisement
Chapters
Table of Contents
