Planet IGSW-2840 User Manual page 475

1. RADIUS authentication must be activated and configured properly for the
web authentication feature to work properly. (See "RADIUS Client" on page
4-88.)
2. Web authentication cannot be configured on trunk ports.
Command
web-auth login-attempts
web-auth quiet-period
web-auth session-timeout
web-auth system-auth-control
web-auth
web-auth re-authenticate (Port)
web-auth re-authenticate (IP)
show web-auth
show web-auth interface
show web-auth summary
web-auth login-attempts
This command defines the limit for failed web authentication login attempts. After the limit is reached, the switch refuses further
login attempts until the quiet time expires. Use the no form to restore the default.
Syntax
web-auth login-attempts count
no web-auth login-attempts
count -The limit of allowed failed login attempts. (Range: 1-3)
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
Console(config)#web-auth login-attempts 2
Console(config)#
Function
Defines the limit for failed web authentication login attempts
Defines the amount of time to wait after the limit for failed login
attempts is exceeded.
Defines the amount of time a session remains valid
Enables web authentication globally for the switch
Enables web authentication for an interface
Ends all web authentication sessions on the port andforces the
users to re-authenticate
Ends the web authentication session associated with the
designated IP address and forces the user to re-authenticate
Displays global web authentication parameters
Displays interface-specific web authenticationparameters and
statistics
Displays a summary of web authentication port parameters and
statistics
Table 5-43 Web Authentication
475
User's Manual of IGSW-2840
Mode
GC
GC
GC
GC
IC
PE
PE
PE
PE
PE