Planet IGSW-2840 User Manual page 360

123-555-1212 name2 Lamar phone-number 123-555-1219
Console(config)#
banner configure mux
This command is used to configure the mux information displayed in the banner. Use the no form to restore the default setting.
Syntax
banner configure mux muxinfo no banner configure mux muxinfo -
The circuit and PVC to which the switch is connected. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure mux command interprets spaces as data input boundaries.
The use of underscores ( _ ) or other unobtrusive non-letter characters is suggested for situations where whitespace is
necessary for clarity.
Example
Console(config)# banner configure mux telco-8734212kx_PVC-1/23
Console(config)#
banner configure note
This command is used to configure the note displayed in the banner. Use the no form to restore the default setting.
Syntax
banner configure note note-info no banner configure note note-info -
Miscellaneous information that does not fit in the other banner categories, or any other information of importance to users
of the switch CLI. (Maximum length: 150 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure note command interprets spaces as data input boundaries.
The use of underscores ( _ ) or other unobtrusive non-letter characters is suggested for situations where whitespace is
necessary for clarity.
360
User's Manual of IGSW-2840