Planet IGSW-2840 User Manual page 141

4.5.5.5 Displaying LACP Status for the Remote Side
You can display configuration settings and the operational state for the remote side of a link aggregation.
collectionis currently enabled and is not expected to be disabled in the
absence of administrative changes or changes in received protocol
information.
• Synchronization – The System considers this link to be IN_SYNC; i.e., it has
been allocated to the correct Link Aggregation Group, the group has been
associated with a compatible Aggregator, and the identity of the Link
Aggregation Group is consistent with the System ID and operational Key
information transmitted.
• Aggregation – The system considers this link to be aggregatable; i.e., a
potential candidate for aggregation.
• Long timeout – Periodic transmission of LACPDUs uses a slow transmission
rate.
• LACP-Activity – Activity control value with regard to this link. (0: Passive; 1:
Active)
Figure 4-5-18 LACP Port Internal Information screenshot
141
User's Manual of IGSW-2840