Planet IGSW-2840 User Manual page 252

4.10.3.3 Service Policy
Attaching a Policy Map to Ingress Queues
This function binds a policy map to the ingress queue of a particular interface.
Command Usage
• You must first define a class map, then define a policy map, and finally bind the service policy to the required interface.
• You can only bind one policy map to an interface.
• The current firmware does not allow you to bind a policy map to an egress queue.
Click QoS  DiffServ  Service Policy Settings.
1.
2. Check Enabled and choose a Policy Map for a port from the scroll-down box, then click Apply.
The page includes the following fields:
Object
Ports
Ingress
Enabled
Policy Map
Figure 4-10-25 Service Policy Settings screenshot
Description
Specifies a port.
Applies the rule to ingress traffic.
Check this to enable a policy map on the specified port.
Select the appropriate policy map from the scroll-down box.
252
User's Manual of IGSW-2840