Planet IGSW-2840 User Manual page 428

tacacs-server host
This command specifies TACACS+ servers and parameters. Use the no form to restore the default.
Syntax
[no] tacacs-server index host {host_ip_address} [port port_number] [timeout timeout] [retransmit retransmit] [key key]
index - Specifies the index number of the server. (Range: 1)
host_ip_address -IP address of the server.
port_number -The TACACS+ server TCP port used for authentication messages. (Range: 1-65535)
timeout - Number of seconds the switch waits for a reply before resending a request. (Range: 1-540 seconds)
retransmit - Number of times the switch will resend an authentication request to the TACACS+ server. (Range: 1-30)
key -Encryption key used to authenticate logon access for client. Do not use blank spaces in the string. (Maximum length:
20 characters)
Default Setting
port - 49
timeout - 5 seconds
retransmit - 2
Command Mode
Global Configuration
Example
Console(config)# tacacs-server 1 host 192.168.1.25
Console(config)#
tacacs-server port
This command specifies the TACACS+ server network port. Use the no form to restore the default.
Syntax
tacacs-server port port_number no tacacs-server port
port_number - TACACS+ server TCP port used for authentication messages. (Range: 1-65535)
Default Setting
49
Command Mode
Global Configuration
Example
Console(config)# tacacs-server port 181
Console(config)#
428
User's Manual of IGSW-2840