Planet IGSW-2840 User Manual page 627

service-policy
This command applies a policy map defined by the policy-map command to the ingress queue of a particular interface. Use the
no form to remove the policy map from this interface.
Syntax
[no] service-policy input policy-map-name
input - Apply to the input traffic.
policy-map-name - Name of the policy map for this interface. (Range: 1-16 characters)
Default Setting
No policy map is attached to an interface.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
You can only assign one policy map to an interface.
You must first define a class map, then define a policy map, and finally use the service-policy command to bind the policy
map to the required interface.
Example
This example applies a service policy to an ingress interface.
Console(config)#interface ethernet 1/1
Console(config-if)#service-policy input rd_policy
Console(config-if)#
627
User's Manual of IGSW-2840