Snmp Configuration - Planet IGSW-2840 User Manual

v3 AuthPriv
The predefined default groups and view can be deleted from the system. You can then
define customized groups and views for the SNMP clients that require access.
4.3.1 SNMP Agent Status
Enable SNMP service for all management clients. (i.e., versions 1, 2c or 3).
The page includes the following fields:
Object
• Snmp Agent Status

4.3.2 SNMP Configuration

Use this page to configure the community strings authorized for management access, and to specify the trap managers that will
receive SNMP notifications or trap messages.
4.3.2.1 SNMP Community
All community strings used for IP Trap Managers should be listed in this table. Up to five community strings may be entered. For
security reasons, you should consider removing the default strings.
user defined user defined
Figure 4-3-1 SNMP Agent Status screenshot
Description
Enable / Disable SNMP on the Industrial Managed Switch
user defined user defined
95
User's Manual of IGSW-2840
Provides user
authentication via MD5
or SHA algorithms and
data privacy using DES
56-bit encryption