Planet IGSW-2840 User Manual page 386

ram - Event history stored in temporary RAM (i.e., memory flushed on power reset).
level -One of the levels listed below. Messages sent include the selected level down to level 0. (Range: 0-7)
Table 4-15 Logging Levels
Level Severity Name
7 debugging
6 informational
5 notifications
4 warnings
3 errors
2 critical
1 alerts
0 emergencies
* There are only Level 2, 5 and 6 error messages for the current firmware release.
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 -0)
Command Mode
Global Configuration
Command Usage
The message level specified for flash memory must be a higher priority (i.e., numerically lower) than that specified for
RAM.
Example
Console(config)#logging history ram 0
Console(config)#
logging host
This command adds a syslog server host IP address that will receive logging messages. Use the no form to remove a syslog
server host.
Syntax
[no] logging host host_ip_address host_ip_address - The IP address of a syslog server.
Default Setting
None
Command Mode
Global Configuration
Description
Debugging messages
Informational messages only
Normal but significant condition, such as cold start
Warning conditions (e.g., return false, unexpected return)
Error conditions (e.g., invalid input, default used)
Critical conditions (e.g., memory allocation, or free memory error -
resource exhausted)
Immediate action needed
System unusable
386
User's Manual of IGSW-2840