Igmp Snooping Commands - Planet IGSW-2840 User Manual

24-port 10/100mbps + 4 gigabit tp/sfp combo industrial managed switch
Table of Contents

Advertisement

5.25 Multicast Filtering Commands
This switch uses IGMP (Internet Group Management Protocol) to query for any attached hosts that want to receive a specific
multicast service. It identifies the ports containing hosts requesting a service and sends data out to those ports only. It then
propagates the service request up to any neighboring multicast switch/router to ensure that it will continue to receive the
multicast service.
Command Groups
IGMP Snooping
IGMP Query
Static Multicast Routing
IGMP Filtering and Throttling
Multicast VLAN Registration

5.25.1 IGMP Snooping Commands

This section describes commands used to configure IGMP snooping on the switch.
Command
ip igmp snooping
ip igmp snooping vlan static
ip igmp snooping version
ip igmp snoopingleave-proxy
ip igmp
snoopingimmediateleave
show ip igmp snooping
show mac-address-table
multicast
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form to disable it.
Function
Configures multicast groups via IGMP snooping or static assignment,
sets the IGMP version, displays current snooping and query settings,
and displays the multicast service and group members
Configures IGMP query parameters for multicast filtering at Layer 2
Configures static multicast router ports
Configures IGMP filtering and throttling
Configures a single network-wide multicast VLAN shared by hosts
residing in other standard or private VLAN groups, preserving security
and data isolation for normal traffic
Table 5-84 Multicast Filtering Commands
Function
Enables IGMP snooping
Adds an interface as a member of a multicast group
Configures the IGMP version for snooping
Enables IGMP leave proxy on the switch
Immediately deletes a member port of a multicast service if a
leave packet is received at that port and immediate-leave is
enabled for the parent VLAN
Shows the IGMP snooping and query configuration
Shows the IGMP snooping MAC multicast list
Table 5-85
IGMP Snooping Commands
630
User's Manual of IGSW-2840
Mode
GC
GC
GC
GC
IC
PE
PE

Advertisement

Table of Contents
loading

Table of Contents