Planet IGSW-2840 User Manual page 353

Console(config)#hostname RD#1
Console(config)#
5.5.2 Banner Information Commands
These commands are used to configure and manage administrative information about the switch, its exact data center location,
details of the electrical and network circuits that supply the switch, as well as contact information for the network administrator
and system manager. This information is only available via the CLI and is automatically displayed before login as soon as a
console or telnet connection has been established.
Command
banner configure
banner configure company
banner configuredc-powerinfo
banner configuredepartment
banner configureequipment-info
banner configureequipment-location
banner configureip-lan
banner configurelp-number
banner configure manager-info
banner configure mux
banner configure note
show banner
banner configure
This command is used to interactively specify administrative information for this device.
Syntax
banner configure
Default Setting
None
Command Mode
Global Configuration
Command Usage
Function
Configures banner information displayed before login
Configures Company information displayed by the banner
Configures DC Power information displayed by the banner
Configures Department information displayed by the banner
Configures Equipment information displayed by the banner
Configures Equipment Location information displayed by
thebanner
Configures IP and LAN information displayed by the banner
Configures LP Number information displayed by the banner
Configures Manager contact information displayed by
thebanner
Configures MUX information displayed by the banner
Configures miscellaneous information displayed by the banner
under the Notes heading
Displays all banner information
Table 5-8 Banner Commands
353
User's Manual of IGSW-2840
Mode
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
NE, PE