Planet IGSW-2840 User Manual page 65

The page includes the following fields:
Object
• Name
• Type
• Startup
• Size
If you download to a new file name using "tftp to startup-config"," the file is automatically set as the start-up configuration file.
To use the new settings, reboot the system via the Reset page.
The file "Factory_Default_Config.cfg" can be copied to the TFTP server, but cannot be
used as the destination on the Industrial Managed Switch.
Description
The name of a file stored on the switch.
Indicates either an operation code file, or a configuration file.
Shows if this file is used when the system is started.
The length of the file in bytes.
65
User's Manual of IGSW-2840