Planet IGSW-2840 User Manual page 349

3 exit
2 interface vlan 1
1 end
Console#
The ! command repeats commands from the Execution command history buffer when you are in Normal Exec or Privileged
Exec Mode, and commands from the Configuration command history buffer when you are in any of the configuration modes. In
this example, the !2 command repeats the second command in the Execution history buffer (config).
Console#!2
Console#config
Console(config)#
reload
This command restarts the system.
When the system is restarted, it will always run the Power-On Self-Test. It will also retain all
configuration information stored in non-volatile memory by the copy running-config
startup-config command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
Console# reload
System will be restarted, continue <y/n>? y
prompt
This command customizes the CLI prompt. Use the no form to restore the default prompt.
Syntax
349
User's Manual of IGSW-2840