Planet IGSW-2840 User Manual page 501

show mac access-list
This command displays the rules for configured MAC ACLs.
Syntax
show mac access-list [acl_name] acl_name – Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Example
Console#show mac access-list
MAC access-list jerry:
permit any 00-e0-29-94-34-de ethertype 0800
Console#
Related Commands
permit, deny
mac access-group
mac access-group
This command binds a port to a MAC ACL. Use the no form to remove the port.
Syntax
mac access-group acl_name {in | out} acl_name – Name of the ACL. (Maximum length: 16 characters)
in – Indicates that this list applies to ingress packets.
• out – Indicates that this list applies to egress packets.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
A port can only be bound to one ACL.
If a port is already bound to an ACL and you bind it to a different ACL, the switch will replace the old binding with the new
one.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#mac access-group jerry in
Console(config-if)#
501
User's Manual of IGSW-2840