Planet IGSW-2840 User Manual page 333

The page includes the following fields:
Object
Cluster Status
Cluster Commander
Role
Cluster IP Pool
Number of Members
Number of Candidates
Figure 4-12-1 Cluster Configuration screenshot
Description
Enables or disables clustering on the switch.
(Default: Enabled)
Enables or disables the switch as a cluster Commander.
(Default: Disabled)
Indicates the current role of the switch in the cluster; either Commander,
Member, or Candidate.
(Default: Candidate)
An "internal" IP address pool that is used to assign IP addresses to Member
switches in the cluster. Internal cluster IP addresses are in the form
10.x.x.member-ID.
Only the base IP address of the pool needs to be set since Member IDs can only
be between 1 and 36. Note that you cannot change the cluster IP pool when
the switch is currently in Commander mode. Commander mode must first be
disabled.
(Default: 10.254.254.1)
The current number of Member switches in the cluster.
The current number of Candidate switches discovered in the network that are
available to become Members.
333
User's Manual of IGSW-2840