System Management Commands - Planet IGSW-2840 User Manual

5.5 System Management Commands

These commands are used to control system logs, passwords, user names, browser configuration options, and display or
configure a variety of other system information.
Command Group
Device Designation
Banner Information
System Status
Frame Size
File Management
Line
Event Logging
SMTP Alerts
Time (System Clock)
Switch Clustering
5.5.1 Device Designation Commands
Command
hostname
snmp-server contact
snmp-server location
hostname
This command specifies or modifies the host name for this device. Use the no form to restore the default host name.
Syntax
hostname name no hostname name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Function
Configures information that uniquely identifies this switch
Configures administrative contact, device identification and location
Displays system configuration, active managers, and version information
Enables support for jumbo frames
Manages code image or switch configuration files
Sets communication parameters for the serial port, including baud rate and console time-out
Controls logging of error messages
Configures SMTP email alerts
Sets the system clock automatically via SNTP server or manually
Configures management of multiple devices via a single IP address
Table 5-6 System Management Commands
Function
Specifies the host name for the switch
Sets the system contact string
Sets the system location string
Table 5-7 Device Designation Commands
352
User's Manual of IGSW-2840
Mode
GC
GC
GC