Planet IGSW-2840 User Manual page 476

web-auth quiet-period
This command defines the amount of time a host must wait after exceeding the limit for failed login attempts, before it may
attempt web authentication again. Use the no form to restore the default.
Syntax
web-auth quiet-period time no web-auth quiet period
time -The amount of time the host must wait before attempting authentication again. (Range: 1-180 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
Example
Console(config)#web-auth quiet-period 120
Console(config)#
web-auth session-timeout
This command defines the amount of time a web-authentication session remains valid. When the session-timeout has been
reached, the host is logged off and must be re-authenticated the next time data is transmitted. Use the no form to restore the
default.
Syntax
web-auth session-timeout timeout no web-auth session timeout
timeout -The amount of time that an authenticated session remains valid. (Range: 300-3600 seconds)
Default Setting
3600 seconds
Command Mode
Global Configuration
Example
Console(config)#web-auth session-timeout 1800
Console(config)#
web-auth system-auth-control
This command globally enables web authentication for the switch. Use the no form to restore the default.
Syntax
[no] web-auth system-auth-control
476
User's Manual of IGSW-2840