Planet IGSW-2840 User Manual page 73

4.2.8.4 SMTP E-Mail Alert
To alert system administrators of problems, the Industrial Managed Switch can use SMTP (Simple Mail Transfer Protocol) to
send email messages when triggered by logging events of a specified level. The messages are sent to specified SMTP servers
on the network and can be retrieved using POP or IMAP clients.
Click System  Log  SMTP.
1.
2. To add an SMTP MAIL Server IP address to the Server IP List, type the new IP address in the Server IP Address box, and
then click Add.
3. To delete an IP address, click the entry in the Server IP List, and then click Remove.
The page includes the following fields:
Object
• Admin Status
• Email Source Address
• Severity
Figure 4-2-20 SMTP Configuration page screenshot
Description
Enables/disables the SMTP function.
(Default: Disabled)
Sets the email address used for the "From" field in alert messages. You may use
a symbolic email address that identifies the switch, or the address of an
administrator responsible for the Industrial Managed Switch.
Sets the syslog severity threshold level used to trigger alert messages. All events
at this level or higher will be sent to the configured email recipients.
73
User's Manual of IGSW-2840