Planet IGSW-2840 User Manual page 557

show garp timer
This command shows the GARP timers for the selected interface.
Syntax
show garp timer [interface] interface
• ethernet unit/port -unit - Stack unit. (Range: 1) -port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec VLAN Commands
Example
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 100 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Related Commands
garp timer
557
User's Manual of IGSW-2840